CVE-2026-80861
Low risk· EPSS 5%Exploitation Probability (EPSS)
Low risk5th percentile - higher than 5% of all known CVEs
Summary
In the Linux kernel, a vulnerability exists in the USB xHCI driver where xhci_gen_setup() reads the controller's capability register even when the controller is inaccessible (e.g., after power failure or bus removal). The read returns 0xFFFFFFFF, leading to an incorrect calculation of operational register addresses and causing an alignment fault on ARM64, resulting in a kernel oops. This affects controllers like Renesas uPD720201 that fail to resume from D3cold.
Risk Assessment
The risk is a potential kernel oops during USB controller initialization when the device is physically damaged or unresponsive. This can disrupt services and require a system reboot, especially in server or embedded environments using ARM64.
Recommendation
Apply the Linux kernel patch that adds an early check for the all-ones value and aborts initialization with -ENODEV when the controller is inaccessible. Update the system to a kernel version containing this fix.
Other vulnerabilities in Linux kernel
See all- CVE-2026-99259Unknown
In the Linux kernel, the soc/tegra: pmc driver has an uninitialised early_pmc->rate variable for legacy 32-bit Tegra devices. The variable is never configured and remains 0, triggering a warning in tegra_pmc_enter_suspend_mode(). The issue appeared after the PMC driver was changed to create the PMC context dynamically, updating rate only in the new context.
- CVE-2026-99258Unknown
In the Linux kernel, hv_apicid_to_vp_index() uses per-CPU hypercall input and output pages. In an SEV-SNP CoCo VM without a paravisor the output page is not allocated, so the hypervisor stores the resulting VP index into memory not allocated by the guest. The fix uses the input page for both input and output.
- CVE-2026-99257Unknown
In the Linux kernel, the shared GPIO mechanism based on platform lookup tables requires an associated struct device. An fwnode-based lookup with no associated device currently causes a NULL-pointer dereference. The fix adds a check that lets the kernel gracefully handle this situation with an error.
- CVE-2026-99256Unknown
In the Linux kernel, the dm cache module used a rw_semaphore for background_work_lock, although write locks on rw_semaphores have strict owner semantics. The locking process was not always the same as the unlocking one, triggering a warning with CONFIG_DEBUG_RWSEMS during suspend/resume of a cache device. The fix replaces the rw_semaphore with a spinlock and a wait queue.
- CVE-2026-99251Unknown
In the Linux kernel, init_vp_index() contains a retry loop that strips CPUs from a node if they are already in the allocated cpumask or outside the HK_TYPE_MANAGED_IRQ housekeeping cpumask. If the housekeeping cpumask contains no CPU in that node, the loop becomes infinite. The fix skips NUMA nodes with no housekeeping CPU and aborts early when no online housekeeping CPUs exist.
- CVE-2026-99250Unknown
In the Linux kernel, the NBCON console printing kthreads are started very early during boot via early_initcall(). Asynchronously enabling/disabling interrupts during early boot may interfere with early SMP setup on some hardware platforms, causing hangs. The fix postpones kthread startup until after all arch initcalls have completed.
- CVE-2026-99249Unknown
In the Linux kernel, zap_pid_ns_processes() waiting for PID namespace cleanup was not freezable. A tracer outside the namespace that does not reap its traced zombies keeps PIDs allocated, making the wait unbounded and causing every suspend attempt to fail. The fix makes the wait loops use TASK_FREEZABLE states so the freezer can freeze waiting tasks.
- CVE-2026-99248Unknown
In the Linux kernel, the i2c: xiic driver was changed to restore non-managed runtime PM instead of the devres-based approach to fix a clk WARN flood. The managed release tore down runtime PM in the wrong order, causing the clock to be disabled twice and triggering "clkN already disabled" warnings on every teardown.
- CVE-2026-99247Unknown
In the Linux kernel, if trace buffer allocation fails during early boot, tracing_disabled remains set and the global trace array events list stays uninitialized. tracer_init_tracefs_work_func() runs asynchronously without checking this state and calls event_trace_init() and init_tracer_tracefs(), leading to a NULL pointer dereference Oops during boot. The fix checks tracing_disabled at the start of the work function.
- CVE-2026-99215Unknown
In the Linux kernel power supply subsystem, a use-after-free vulnerability exists. If a power supply is unregistered while its external_power_changed() callback is still running, the driver may free data that the callback is still accessing, leading to a kernel crash (NULL pointer dereference).
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory. arm64 faults on unaligned device accesses, so instead of xhci_handshake() catching the all-ones value and returning -ENODEV, setup oopses: xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci-pci-renesas 0005:08:00.0: xHCI Host Controller xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1 Unable to handle kernel paging request at virtual address ffff80030a770103 ESR = 0x0000000096000021 FSC = 0x21: alignment fault Internal error: Oops: 0000000096000021 [#1] SMP pc : xhci_halt [xhci_hcd] Call trace: xhci_halt xhci_gen_setup xhci_pci_setup usb_add_hcd usb_hcd_pci_probe xhci_pci_common_probe xhci_pci_renesas_probe This was hit with a Renesas uPD720201 that failed to power up ("Unable to change power state from D3cold to D0, device inaccessible") yet still reached the HCD probe path. Read the capability register once, and if it reads back the all-ones value (as xhci_handshake() and xhci_reset() already test for), abort setup with -ENODEV before op_regs is derived from it. Reading it once also avoids re-reading a register that may change under a concurrent hot-removal.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS

