CVE-2026-80840
Low risk· EPSS 10%Exploitation Probability (EPSS)
Low risk10th percentile - higher than 10% of all known CVEs
Summary
In the Linux kernel's IPv6 Segment Routing (seg6) module, during IPIP decapsulation (End.DX4, End.DT4), the IPv4 control block (IPCB) is not cleared. This causes IPv4 to use stale IP6CB data, leading to an out-of-bounds read in __ip_options_echo() and potential memory corruption (KASAN: slab-out-of-bounds).
Risk Assessment
An attacker can send a specially crafted IPv6 packet with extension headers to trigger an out-of-bounds write in the kernel, potentially causing a system crash or privilege escalation. The vulnerability affects systems with IPv6 Segment Routing enabled.
Recommendation
Apply the official Linux kernel patch that clears IPCB after IPIP decapsulation in seg6. If an immediate update is not possible, consider disabling IPv6 Segment Routing (seg6) on edge routers.
Other vulnerabilities in Linux kernel
See all- CVE-2026-99259Unknown
In the Linux kernel, the soc/tegra: pmc driver has an uninitialised early_pmc->rate variable for legacy 32-bit Tegra devices. The variable is never configured and remains 0, triggering a warning in tegra_pmc_enter_suspend_mode(). The issue appeared after the PMC driver was changed to create the PMC context dynamically, updating rate only in the new context.
- CVE-2026-99258Unknown
In the Linux kernel, hv_apicid_to_vp_index() uses per-CPU hypercall input and output pages. In an SEV-SNP CoCo VM without a paravisor the output page is not allocated, so the hypervisor stores the resulting VP index into memory not allocated by the guest. The fix uses the input page for both input and output.
- CVE-2026-99257Unknown
In the Linux kernel, the shared GPIO mechanism based on platform lookup tables requires an associated struct device. An fwnode-based lookup with no associated device currently causes a NULL-pointer dereference. The fix adds a check that lets the kernel gracefully handle this situation with an error.
- CVE-2026-99256Unknown
In the Linux kernel, the dm cache module used a rw_semaphore for background_work_lock, although write locks on rw_semaphores have strict owner semantics. The locking process was not always the same as the unlocking one, triggering a warning with CONFIG_DEBUG_RWSEMS during suspend/resume of a cache device. The fix replaces the rw_semaphore with a spinlock and a wait queue.
- CVE-2026-99251Unknown
In the Linux kernel, init_vp_index() contains a retry loop that strips CPUs from a node if they are already in the allocated cpumask or outside the HK_TYPE_MANAGED_IRQ housekeeping cpumask. If the housekeeping cpumask contains no CPU in that node, the loop becomes infinite. The fix skips NUMA nodes with no housekeeping CPU and aborts early when no online housekeeping CPUs exist.
- CVE-2026-99250Unknown
In the Linux kernel, the NBCON console printing kthreads are started very early during boot via early_initcall(). Asynchronously enabling/disabling interrupts during early boot may interfere with early SMP setup on some hardware platforms, causing hangs. The fix postpones kthread startup until after all arch initcalls have completed.
- CVE-2026-99249Unknown
In the Linux kernel, zap_pid_ns_processes() waiting for PID namespace cleanup was not freezable. A tracer outside the namespace that does not reap its traced zombies keeps PIDs allocated, making the wait unbounded and causing every suspend attempt to fail. The fix makes the wait loops use TASK_FREEZABLE states so the freezer can freeze waiting tasks.
- CVE-2026-99248Unknown
In the Linux kernel, the i2c: xiic driver was changed to restore non-managed runtime PM instead of the devres-based approach to fix a clk WARN flood. The managed release tore down runtime PM in the wrong order, causing the clock to be disabled twice and triggering "clkN already disabled" warnings on every teardown.
- CVE-2026-99247Unknown
In the Linux kernel, if trace buffer allocation fails during early boot, tracing_disabled remains set and the global trace array events list stays uninitialized. tracer_init_tracefs_work_func() runs asynchronously without checking this state and calls event_trace_init() and init_tracer_tracefs(), leading to a NULL pointer dereference Oops during boot. The fix checks tracing_disabled at the start of the work function.
- CVE-2026-99215Unknown
In the Linux kernel power supply subsystem, a use-after-free vulnerability exists. If a power supply is unregistered while its external_power_changed() callback is still running, the driver may free data that the callback is still accessing, leading to a kernel crash (NULL pointer dereference).
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: ipv6: seg6: clear IPv4 control block on IPIP decapsulation End.DX4 and End.DT4 decapsulate an IPv4 packet through decap_and_validate() and send it directly to IPv4 routing. The inner packet therefore bypasses ip_rcv_core(), which normally clears IPCB before IPv4 interprets skb->cb. The skb instead retains IP6CB data from the outer packet. IP6CB and IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and ts. The sender can make the stale optlen byte nonzero with a valid outer extension-header chain. The reproducers put an eight-byte Destination Options header immediately after the 40-byte IPv6 header and before the Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled Destination Options offset in both lastopt and nhoff, setting them to 40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees optlen = 40 and rr = 40. Both tcp_v4_save_options() and __ip_options_echo() skip option copying when optlen is zero. Here optlen is 40, so the TCP SYN path allocates room for 40 bytes of option data and calls __ip_options_echo(). The stale rr value makes that function read inner packet byte 41 as the Record Route option length. The reproducers set that sender-controlled byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte option-data area. Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5 kernel both produced: BUG: KASAN: slab-out-of-bounds in __ip_options_echo() Write of size 255 The relevant End.DX4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dx4_finish input_action_end_dx4 The relevant End.DT4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dt4 tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so it does not appear as a separate frame. When decap_and_validate() handles IPPROTO_IPIP, save the ingress interface from IP6CB, clear IPCB, and restore the saved value. Doing this in the common decapsulation path covers End.DX4, End.DT4, and End.DT46's IPv4 arm. Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after l3mdev processing, which can replace skb_iif with the L3 master; IP6CB iif still records the receiving interface set at IPv6 ingress.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS

