CVE-2026-74653
Low risk· EPSS 6%Exploitation Probability (EPSS)
Low risk6th percentile - higher than 6% of all known CVEs
Summary
A vulnerability in the Linux kernel serial driver 8250_of for the NXP LPC32xx UART was found. The UART can report an RX timeout interrupt while the FIFO is empty, which is never cleared. This causes an interrupt storm that can livelock the CPU on single-core ARM926 systems.
Risk Assessment
An attacker or even a regular user opening the ttyS1 port can cause a system hang (soft-lockup), leading to denial of service. The vulnerability can be exploited for DoS attacks on devices using LPC32xx.
Recommendation
Apply the Linux kernel patch that adds a hardware-specific handle_irq for PORT_LPC3220 in the 8250_of driver. If immediate kernel update is not possible, restrict access to the ttyS1 port or disable it if not required.
Other vulnerabilities in Linux kernel
See all- CVE-2026-99259Unknown
In the Linux kernel, the soc/tegra: pmc driver has an uninitialised early_pmc->rate variable for legacy 32-bit Tegra devices. The variable is never configured and remains 0, triggering a warning in tegra_pmc_enter_suspend_mode(). The issue appeared after the PMC driver was changed to create the PMC context dynamically, updating rate only in the new context.
- CVE-2026-99258Unknown
In the Linux kernel, hv_apicid_to_vp_index() uses per-CPU hypercall input and output pages. In an SEV-SNP CoCo VM without a paravisor the output page is not allocated, so the hypervisor stores the resulting VP index into memory not allocated by the guest. The fix uses the input page for both input and output.
- CVE-2026-99257Unknown
In the Linux kernel, the shared GPIO mechanism based on platform lookup tables requires an associated struct device. An fwnode-based lookup with no associated device currently causes a NULL-pointer dereference. The fix adds a check that lets the kernel gracefully handle this situation with an error.
- CVE-2026-99256Unknown
In the Linux kernel, the dm cache module used a rw_semaphore for background_work_lock, although write locks on rw_semaphores have strict owner semantics. The locking process was not always the same as the unlocking one, triggering a warning with CONFIG_DEBUG_RWSEMS during suspend/resume of a cache device. The fix replaces the rw_semaphore with a spinlock and a wait queue.
- CVE-2026-99251Unknown
In the Linux kernel, init_vp_index() contains a retry loop that strips CPUs from a node if they are already in the allocated cpumask or outside the HK_TYPE_MANAGED_IRQ housekeeping cpumask. If the housekeeping cpumask contains no CPU in that node, the loop becomes infinite. The fix skips NUMA nodes with no housekeeping CPU and aborts early when no online housekeeping CPUs exist.
- CVE-2026-99250Unknown
In the Linux kernel, the NBCON console printing kthreads are started very early during boot via early_initcall(). Asynchronously enabling/disabling interrupts during early boot may interfere with early SMP setup on some hardware platforms, causing hangs. The fix postpones kthread startup until after all arch initcalls have completed.
- CVE-2026-99249Unknown
In the Linux kernel, zap_pid_ns_processes() waiting for PID namespace cleanup was not freezable. A tracer outside the namespace that does not reap its traced zombies keeps PIDs allocated, making the wait unbounded and causing every suspend attempt to fail. The fix makes the wait loops use TASK_FREEZABLE states so the freezer can freeze waiting tasks.
- CVE-2026-99248Unknown
In the Linux kernel, the i2c: xiic driver was changed to restore non-managed runtime PM instead of the devres-based approach to fix a clk WARN flood. The managed release tore down runtime PM in the wrong order, causing the clock to be disabled twice and triggering "clkN already disabled" warnings on every teardown.
- CVE-2026-99247Unknown
In the Linux kernel, if trace buffer allocation fails during early boot, tracing_disabled remains set and the global trace array events list stays uninitialized. tracer_init_tracefs_work_func() runs asynchronously without checking this state and calls event_trace_init() and init_tracer_tracefs(), leading to a NULL pointer dereference Oops during boot. The fix checks tracing_disabled at the start of the work function.
- CVE-2026-99215Unknown
In the Linux kernel power supply subsystem, a use-after-free vulnerability exists. If a power supply is unregistered while its external_power_changed() callback is still running, the driver may free data that the callback is still accessing, leading to a kernel crash (NULL pointer dereference).
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked(). LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR read to clear the condition, then calls serial8250_handle_irq_locked(). No real received data is ever discarded, and it is a no-op on healthy UARTs which never report a timeout with DR clear. This is the same class of bug already worked around in other 8250 drivers; see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt") which reports the identical iir=0xcc/lsr=0x60. See also UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS

