CVE-2026-72134
HighCVSS 7.8Exploitation Probability (EPSS)
Low risk6th percentile - higher than 6% of all known CVEs
Summary
A vulnerability in the Linux kernel's SPI driver for i.MX devices (spi-imx) was found. When DMA is selected but the DMA descriptor cannot be prepared, the driver falls back to PIO without undoing DMA configuration, leading to corrupted data transfers. This affects e.g. i.MX8MP boards with Infineon SLB9670 TPM, where data is shifted and the device fails.
Risk Assessment
The risk includes data corruption on the SPI bus, which can cause connected devices (e.g., TPM) to malfunction, potentially leading to security or stability issues.
Recommendation
Update the Linux kernel to a version containing the fix that sets the fallback flag before re-running PIO transfer configuration. Also verify that the SDMA driver is properly configured (e.g., firmware loaded).
Other vulnerabilities in Linux kernel
See all- CVE-2026-99282Unknown
In the Linux kernel, net/sched: sch_teql contains a use-after-free vulnerability. teql_master_xmit() incorrectly treats NET_XMIT_DROP as an unconsumed packet and operates on freed memory. The issue affects configurations with VLAN interfaces and pfifo qdisc with limit 0.
- CVE-2026-99281Unknown
A flaw in the Linux kernel tun/tap mechanism allowed processes without CAP_NET_ADMIN to attach to persistent tun devices that had no owner or group set. Anyone able to open /dev/net/tun could attach to such devices and intercept or inject network traffic. The fix now requires CAP_NET_ADMIN to attach to an ownerless, groupless device.
- CVE-2026-99280Unknown
In the Linux kernel, the following vulnerability has been resolved: ksmbd: drain session procfs readers before dropping table references. Session registration failure and connection cleanup can drop the table reference while the per-session procfs entry is still accessible. If a reader holds the last remaining reference, its final put calls proc_remove() from its own callback and waits for that callback to finish. Remove the procfs entry before dropping the table reference in the registration failure path. Queue sessions removed during connection cleanup and drain their procfs readers after releasing both session locks, then return their table references. Keep the global hash node unhashed while a session is queued so a concurrent unregister cannot drop the reference again. Previous-session replacement also destroys the file table before the session is finally freed. Detach the idr under the lock used by procfs file counters, and report zero files after it has been detached. This prevents a reader from accessing the idr during or after its destruction.
- CVE-2026-99278Unknown
In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit sessions on each connection. The pending setup limit only counts InProgress sessions. A client can complete authentication repeatedly and retain an unbounded number of Valid sessions on one connection. Reserve a connection slot before allocating a session and retain a connection reference while authentication is in progress. The first SMB3 channel takes over that reservation; binding to another connection reserves one slot there. Reauthentication and authentication continuation reuse the existing reservation. Return slots on allocation or insertion failure, channel removal, and final session destruction. Accept max_sessions_per_connection in reserved startup-request space and default to 64 when older tools leave it zero. Keep the request size and existing field offsets unchanged. Expose the configured limit in procfs. The existing connection limits bound the aggregate number of sessions without a separate global session allocation limit.
- CVE-2026-99259Unknown
In the Linux kernel, the soc/tegra: pmc driver has an uninitialised early_pmc->rate variable for legacy 32-bit Tegra devices. The variable is never configured and remains 0, triggering a warning in tegra_pmc_enter_suspend_mode(). The issue appeared after the PMC driver was changed to create the PMC context dynamically, updating rate only in the new context.
- CVE-2026-99258Unknown
In the Linux kernel, hv_apicid_to_vp_index() uses per-CPU hypercall input and output pages. In an SEV-SNP CoCo VM without a paravisor the output page is not allocated, so the hypervisor stores the resulting VP index into memory not allocated by the guest. The fix uses the input page for both input and output.
- CVE-2026-99257Unknown
In the Linux kernel, the shared GPIO mechanism based on platform lookup tables requires an associated struct device. An fwnode-based lookup with no associated device currently causes a NULL-pointer dereference. The fix adds a check that lets the kernel gracefully handle this situation with an error.
- CVE-2026-99256Unknown
In the Linux kernel, the dm cache module used a rw_semaphore for background_work_lock, although write locks on rw_semaphores have strict owner semantics. The locking process was not always the same as the unlocking one, triggering a warning with CONFIG_DEBUG_RWSEMS during suspend/resume of a cache device. The fix replaces the rw_semaphore with a spinlock and a wait queue.
- CVE-2026-99251Unknown
In the Linux kernel, init_vp_index() contains a retry loop that strips CPUs from a node if they are already in the allocated cpumask or outside the HK_TYPE_MANAGED_IRQ housekeeping cpumask. If the housekeeping cpumask contains no CPU in that node, the loop becomes infinite. The fix skips NUMA nodes with no housekeeping CPU and aborts early when no online housekeeping CPUs exist.
- CVE-2026-99250Unknown
In the Linux kernel, the NBCON console printing kthreads are started very early during boot via early_initcall(). Asynchronously enabling/disabling interrupts during early boot may interfere with early SMP setup on some hardware platforms, causing hangs. The fix postpones kthread startup until after all arch initcalls have completed.
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: spi: imx: reconfigure for PIO when DMA cannot be started When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA: spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the SDMA watermarks. If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single() returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and falls back to PIO. The dynamic-burst DMA path uses its own bounce buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped are not set and the core's DMA->PIO retry is skipped; the driver falls back to PIO internally. But none of the DMA-mode configuration is undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst length and dynamic_burst cleared, and the transferred data is corrupted. This is easily hit on i.MX8MP boards that describe ECSPI DMA in the device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin): every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then returns shifted TPM2_GetCapability data, is flagged "field failure mode", /dev/tpmrm0 is never created. Set controller->fallback before re-running spi_imx_setupxfer() so the ECSPI is reconfigured exactly like a normal PIO transfer. With controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma() return false, so it clears spi_imx->usedma and reprograms the controller (clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No explicit spi_imx->usedma = false is needed: setupxfer() already updates it from the can_dma() result.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS

