CVE-2026-64560
HighCVSS 7.8Exploitation Probability (EPSS)
Low risk43th percentile - higher than 43% of all known CVEs
Summary
A use-after-free (UAF) vulnerability was discovered in the Linux kernel's POSIX CPU timers mechanism. The issue arises from a race condition during a non-leader exec() call, potentially leading to access of a freed timer object.
Risk Assessment
An attacker could exploit this vulnerability to escalate privileges or cause a denial of service (DoS) by manipulating CPU timers during exec(). The risk includes system instability and potential kernel compromise.
Recommendation
Immediately update the Linux kernel to a version containing the fix (commit addressing the issue). Monitor distributions for the patch and apply it urgently.
Other vulnerabilities in Linux kernel
See all- CVE-2026-99282Unknown
In the Linux kernel, net/sched: sch_teql contains a use-after-free vulnerability. teql_master_xmit() incorrectly treats NET_XMIT_DROP as an unconsumed packet and operates on freed memory. The issue affects configurations with VLAN interfaces and pfifo qdisc with limit 0.
- CVE-2026-99281Unknown
A flaw in the Linux kernel tun/tap mechanism allowed processes without CAP_NET_ADMIN to attach to persistent tun devices that had no owner or group set. Anyone able to open /dev/net/tun could attach to such devices and intercept or inject network traffic. The fix now requires CAP_NET_ADMIN to attach to an ownerless, groupless device.
- CVE-2026-99280Unknown
In the Linux kernel, the following vulnerability has been resolved: ksmbd: drain session procfs readers before dropping table references. Session registration failure and connection cleanup can drop the table reference while the per-session procfs entry is still accessible. If a reader holds the last remaining reference, its final put calls proc_remove() from its own callback and waits for that callback to finish. Remove the procfs entry before dropping the table reference in the registration failure path. Queue sessions removed during connection cleanup and drain their procfs readers after releasing both session locks, then return their table references. Keep the global hash node unhashed while a session is queued so a concurrent unregister cannot drop the reference again. Previous-session replacement also destroys the file table before the session is finally freed. Detach the idr under the lock used by procfs file counters, and report zero files after it has been detached. This prevents a reader from accessing the idr during or after its destruction.
- CVE-2026-99278Unknown
In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit sessions on each connection. The pending setup limit only counts InProgress sessions. A client can complete authentication repeatedly and retain an unbounded number of Valid sessions on one connection. Reserve a connection slot before allocating a session and retain a connection reference while authentication is in progress. The first SMB3 channel takes over that reservation; binding to another connection reserves one slot there. Reauthentication and authentication continuation reuse the existing reservation. Return slots on allocation or insertion failure, channel removal, and final session destruction. Accept max_sessions_per_connection in reserved startup-request space and default to 64 when older tools leave it zero. Keep the request size and existing field offsets unchanged. Expose the configured limit in procfs. The existing connection limits bound the aggregate number of sessions without a separate global session allocation limit.
- CVE-2026-99259Unknown
In the Linux kernel, the soc/tegra: pmc driver has an uninitialised early_pmc->rate variable for legacy 32-bit Tegra devices. The variable is never configured and remains 0, triggering a warning in tegra_pmc_enter_suspend_mode(). The issue appeared after the PMC driver was changed to create the PMC context dynamically, updating rate only in the new context.
- CVE-2026-99258Unknown
In the Linux kernel, hv_apicid_to_vp_index() uses per-CPU hypercall input and output pages. In an SEV-SNP CoCo VM without a paravisor the output page is not allocated, so the hypervisor stores the resulting VP index into memory not allocated by the guest. The fix uses the input page for both input and output.
- CVE-2026-99257Unknown
In the Linux kernel, the shared GPIO mechanism based on platform lookup tables requires an associated struct device. An fwnode-based lookup with no associated device currently causes a NULL-pointer dereference. The fix adds a check that lets the kernel gracefully handle this situation with an error.
- CVE-2026-99256Unknown
In the Linux kernel, the dm cache module used a rw_semaphore for background_work_lock, although write locks on rw_semaphores have strict owner semantics. The locking process was not always the same as the unlocking one, triggering a warning with CONFIG_DEBUG_RWSEMS during suspend/resume of a cache device. The fix replaces the rw_semaphore with a spinlock and a wait queue.
- CVE-2026-99251Unknown
In the Linux kernel, init_vp_index() contains a retry loop that strips CPUs from a node if they are already in the allocated cpumask or outside the HK_TYPE_MANAGED_IRQ housekeeping cpumask. If the housekeeping cpumask contains no CPU in that node, the loop becomes infinite. The fix skips NUMA nodes with no housekeeping CPU and aborts early when no online housekeeping CPUs exist.
- CVE-2026-99250Unknown
In the Linux kernel, the NBCON console printing kthreads are started very early during boot via early_initcall(). Asynchronously enabling/disabling interrupts during early boot may interfere with early SMP setup on some hardware platforms, causing hangs. The fix postpones kthread startup until after all arch initcalls have completed.
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Prevent UAF caused by non-leader exec() race Wongi and Jungwoo decoded and reported a non-leader exec() related race which can result in an UAF: sys_timer_delete() exec() posix_cpu_timer_del() // Observes old leader p = pid_task(pid, pid_type); de_thread() switch_leader(); release_task(old_leader) __exit_signal(old_leader) sighand = lock(old_leader, sighand); posix_cpu_timers*_exit(); sighand = lock_task_sighand(p) unhash_task(old_leader); sh = lock(p, sighand) old_leader->sighand = NULL; unlock(sighand); (p->sighand == NULL) unlock(sh) return NULL; // Returns without action if(!sighand) return 0; free_posix_timer(); This is "harmless" unless the deleted timer was armed and enqueued in p->signal because on exec() a TGID targeted timer is inherited. As sys_timer_delete() freed the underlying posix timer object run_posix_cpu_timers() or any timerqueue related add/delete operations on other timers will access the freed object's timerqueue node, which results in an UAF. There is a similar problem vs. posix_cpu_timer_set(). For regular posix timers it just transiently returns -ESRCH to user space, but for the use case in do_cpu_nanosleep() it's the same UAF just that the k_itimer is allocated on the stack. Also posix_cpu_timer_rearm() fails to rearm the timer, which means it stops to expire. While debating solutions Frederic pointed out another problem: posix_cpu_timer_del(tmr) __exit_signal(p) posix_cpu_timers*_exit(p); unhash_task(p); p->sighand = NULL; sh = lock_task_sighand(p) sighand = p->sighand; if (!sighand) return NULL; lock(sighand); if (!sh) WARN_ON_ONCE(timer_queued(tmr)); On weakly ordered architectures it is not guaranteed that posix_cpu_timer_del() will observe the stores in posix_cpu_timers*_exit() when p->sighand is observed as NULL, which means the WARN() can be a false positive. Solve these issues by: 1) Changing the store in __exit_signal() to smp_store_release(). 2) Adding a smp_acquire__after_ctrl_dep() into the !sighand path of lock_task_sighand(). 3) Creating a helper function for looking up the task and locking sighand which does not return when sighand == NULL. Instead it retries the task lookup and only if that fails it gives up. 4) Using that helper in the three affected functions. #1/#2 ensures that the reader side which observes sighand == NULL also observes all preceeding stores, i.e. the stores in posix_cpu_timers*_exit() and the ones in unhash_task(). #3 ensures that the above described non-leader exec() situation is handled gracefully. When the task lookup returns the old leader, but sighand == NULL then it retries. In the non-leader exec() case the subsequent task lookup will observe the new leader due to #1/#2. In normal exit() scenarios the subsequent lookup fails. When the task lookup fails, the function also checks whether the timer is still enqueued and issues a warning if that's the case. Unfortunately there is nothing which can be done about it, but as the task is already not longer visible the timer should not be accessed anymore. This check also requires memory ordering, which is not provided when the first lookup fails. To achieve that the check is preceeded by a smp_rmb() which pairs with the smp_wmb() in write_seqlock() in __exit_signal(). That ensures that the stores in posix_cpu_timers*_exit() are visible. The history of the non-leader exec() issue goes back to the early days of posix CPU timers, which stored a pointer to the group leader task in the timer. That obviously fails when a non-leader exec() switches the leader. commit e0a70217107e ("posix-cpu-timers: workaround to suppress the problems with mt exec") added a temporary workaround for that in 2010 which surv ---truncated---
Vulnerability data from NVD (NIST) · CISA KEV · EPSS