CVE-2026-64374
HighCVSS 7.5Exploitation Probability (EPSS)
Low risk31th percentile - higher than 31% of all known CVEs
Summary
A vulnerability was found in the Linux kernel's RT_PUSH_IPI mechanism for the real-time (RT) scheduler. When RT_PUSH_IPI is enabled on a system without PREEMPT_RT, a live lock can occur on a CPU where softirqs run in interrupt context. This causes excessive IPI interrupts that slow down softirq processing, preventing context switching and leading to CPU lockup.
Risk Assessment
The organization may experience complete lockup of selected CPU cores in systems with heavy network traffic and RT tasks, leading to significant performance degradation or system unresponsiveness.
Recommendation
Update the Linux kernel to a version containing the fix that disables RT_PUSH_IPI by default for non-PREEMPT_RT configurations. As a workaround, manually disable RT_PUSH_IPI by setting the kernel parameter `sched_rt_push_ipi=0`.
Other vulnerabilities in Linux kernel
See all- CVE-2026-99282Unknown
In the Linux kernel, net/sched: sch_teql contains a use-after-free vulnerability. teql_master_xmit() incorrectly treats NET_XMIT_DROP as an unconsumed packet and operates on freed memory. The issue affects configurations with VLAN interfaces and pfifo qdisc with limit 0.
- CVE-2026-99281Unknown
A flaw in the Linux kernel tun/tap mechanism allowed processes without CAP_NET_ADMIN to attach to persistent tun devices that had no owner or group set. Anyone able to open /dev/net/tun could attach to such devices and intercept or inject network traffic. The fix now requires CAP_NET_ADMIN to attach to an ownerless, groupless device.
- CVE-2026-99280Unknown
In the Linux kernel, the following vulnerability has been resolved: ksmbd: drain session procfs readers before dropping table references. Session registration failure and connection cleanup can drop the table reference while the per-session procfs entry is still accessible. If a reader holds the last remaining reference, its final put calls proc_remove() from its own callback and waits for that callback to finish. Remove the procfs entry before dropping the table reference in the registration failure path. Queue sessions removed during connection cleanup and drain their procfs readers after releasing both session locks, then return their table references. Keep the global hash node unhashed while a session is queued so a concurrent unregister cannot drop the reference again. Previous-session replacement also destroys the file table before the session is finally freed. Detach the idr under the lock used by procfs file counters, and report zero files after it has been detached. This prevents a reader from accessing the idr during or after its destruction.
- CVE-2026-99278Unknown
In the Linux kernel, the following vulnerability has been resolved: ksmbd: limit sessions on each connection. The pending setup limit only counts InProgress sessions. A client can complete authentication repeatedly and retain an unbounded number of Valid sessions on one connection. Reserve a connection slot before allocating a session and retain a connection reference while authentication is in progress. The first SMB3 channel takes over that reservation; binding to another connection reserves one slot there. Reauthentication and authentication continuation reuse the existing reservation. Return slots on allocation or insertion failure, channel removal, and final session destruction. Accept max_sessions_per_connection in reserved startup-request space and default to 64 when older tools leave it zero. Keep the request size and existing field offsets unchanged. Expose the configured limit in procfs. The existing connection limits bound the aggregate number of sessions without a separate global session allocation limit.
- CVE-2026-99259Unknown
In the Linux kernel, the soc/tegra: pmc driver has an uninitialised early_pmc->rate variable for legacy 32-bit Tegra devices. The variable is never configured and remains 0, triggering a warning in tegra_pmc_enter_suspend_mode(). The issue appeared after the PMC driver was changed to create the PMC context dynamically, updating rate only in the new context.
- CVE-2026-99258Unknown
In the Linux kernel, hv_apicid_to_vp_index() uses per-CPU hypercall input and output pages. In an SEV-SNP CoCo VM without a paravisor the output page is not allocated, so the hypervisor stores the resulting VP index into memory not allocated by the guest. The fix uses the input page for both input and output.
- CVE-2026-99257Unknown
In the Linux kernel, the shared GPIO mechanism based on platform lookup tables requires an associated struct device. An fwnode-based lookup with no associated device currently causes a NULL-pointer dereference. The fix adds a check that lets the kernel gracefully handle this situation with an error.
- CVE-2026-99256Unknown
In the Linux kernel, the dm cache module used a rw_semaphore for background_work_lock, although write locks on rw_semaphores have strict owner semantics. The locking process was not always the same as the unlocking one, triggering a warning with CONFIG_DEBUG_RWSEMS during suspend/resume of a cache device. The fix replaces the rw_semaphore with a spinlock and a wait queue.
- CVE-2026-99251Unknown
In the Linux kernel, init_vp_index() contains a retry loop that strips CPUs from a node if they are already in the allocated cpumask or outside the HK_TYPE_MANAGED_IRQ housekeeping cpumask. If the housekeeping cpumask contains no CPU in that node, the loop becomes infinite. The fix skips NUMA nodes with no housekeeping CPU and aborts early when no online housekeeping CPUs exist.
- CVE-2026-99250Unknown
In the Linux kernel, the NBCON console printing kthreads are started very early during boot via early_initcall(). Asynchronously enabling/disabling interrupts during early boot may interfere with early SMP setup on some hardware platforms, causing hangs. The fix postpones kthread startup until after all arch initcalls have completed.
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the overloaded CPU and move the RT task from that CPU's runqueue to the local one and schedule the higher priority RT task. This caused issues when a lot of CPUs would schedule a lower priority task at the same time. They would all try to grab the same runqueue lock of the CPU with the overloaded RT tasks. Only the first CPU that got in will get that task. All the others would wait until they got the runqueue lock and see there's nothing to pull and do nothing. On systems with lots of CPUs, this caused a large latency (up to 500us) which is beyond what PREEMPT_RT is to allow. The solution to that was to create an RT_PUSH_IPI logic. When any CPU wanted to pull a task, instead of grabbing the runqueue lock of the overloaded CPU, it would start by sending an IPI to the overloaded CPU, and that IPI handler would have the CPU with the waiting RT task do a push instead. Then that handler would send an IPI to the next CPU with overloaded RT tasks, and so on. Note, after the first CPU starts this process, if another CPU wanted to do a pull, it would see that the process has already begun and would only increment a counter to have the IPIs continue again. The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded context on PREEMPT_RT but they can run in an interrupt context in non-RT. If an IPI lands on a CPU that has just woken up multiple RT tasks and the current CPU is running a non RT or a low priority RT task, instead of doing a push, it would simply do a schedule on that CPU. But if a softirq was also executing on this CPU, the schedule would need to wait until the softirq finished. Until then, the CPU would still be considered overloaded as there are RT tasks still waiting to run on it. A live lock occurred on a workload that was doing heavy networking traffic on a large machine where the softirqs would run 500us out of 750us. And it would also be waking up RT tasks, causing the RT pull logic to be constantly executed. When a softirq triggered on a CPU with RT tasks queued but not running yet, and the other CPUs would see this CPU as being overloaded, they would send an IPI over to it. The CPU would notice that the waiting RT tasks are of higher priority than the currently running task and simply schedule that CPU instead. But because the softirq was executing, before it could schedule, it would receive another IPI to do the same. The amount of IPIs would slow down the currently running softirq so much that before it could return back to task context, it would execute another softirq never allowing the CPU to schedule. This live locked that CPU. As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if PREEMPT_RT is not enabled.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS