CVE-2024-26873
MediumCVSS 5.5Exploitation Probability (EPSS)
Low risk6th percentile - higher than 6% of all known CVEs
Summary
In the Linux kernel, a deadlock issue related to automatic dump exists in the scsi: hisi_sas driver. When a device goes offline and a 2-bit ECC error occurs simultaneously, the internal abort times out and triggers an automatic dump, which cannot execute because the hisi_hba semaphore is already held, preventing controller reset.
Risk Assessment
This can cause hung kernel tasks and block the SAS controller, resulting in unavailability of attached storage devices and requiring a system reboot.
Recommendation
Update the Linux kernel to a version that includes the fix for CVE-2024-26873 (the corresponding stable commit).
Other vulnerabilities in Linux kernel
See all- CVE-2026-99259Unknown
In the Linux kernel, the soc/tegra: pmc driver has an uninitialised early_pmc->rate variable for legacy 32-bit Tegra devices. The variable is never configured and remains 0, triggering a warning in tegra_pmc_enter_suspend_mode(). The issue appeared after the PMC driver was changed to create the PMC context dynamically, updating rate only in the new context.
- CVE-2026-99258Unknown
In the Linux kernel, hv_apicid_to_vp_index() uses per-CPU hypercall input and output pages. In an SEV-SNP CoCo VM without a paravisor the output page is not allocated, so the hypervisor stores the resulting VP index into memory not allocated by the guest. The fix uses the input page for both input and output.
- CVE-2026-99257Unknown
In the Linux kernel, the shared GPIO mechanism based on platform lookup tables requires an associated struct device. An fwnode-based lookup with no associated device currently causes a NULL-pointer dereference. The fix adds a check that lets the kernel gracefully handle this situation with an error.
- CVE-2026-99256Unknown
In the Linux kernel, the dm cache module used a rw_semaphore for background_work_lock, although write locks on rw_semaphores have strict owner semantics. The locking process was not always the same as the unlocking one, triggering a warning with CONFIG_DEBUG_RWSEMS during suspend/resume of a cache device. The fix replaces the rw_semaphore with a spinlock and a wait queue.
- CVE-2026-99251Unknown
In the Linux kernel, init_vp_index() contains a retry loop that strips CPUs from a node if they are already in the allocated cpumask or outside the HK_TYPE_MANAGED_IRQ housekeeping cpumask. If the housekeeping cpumask contains no CPU in that node, the loop becomes infinite. The fix skips NUMA nodes with no housekeeping CPU and aborts early when no online housekeeping CPUs exist.
- CVE-2026-99250Unknown
In the Linux kernel, the NBCON console printing kthreads are started very early during boot via early_initcall(). Asynchronously enabling/disabling interrupts during early boot may interfere with early SMP setup on some hardware platforms, causing hangs. The fix postpones kthread startup until after all arch initcalls have completed.
- CVE-2026-99249Unknown
In the Linux kernel, zap_pid_ns_processes() waiting for PID namespace cleanup was not freezable. A tracer outside the namespace that does not reap its traced zombies keeps PIDs allocated, making the wait unbounded and causing every suspend attempt to fail. The fix makes the wait loops use TASK_FREEZABLE states so the freezer can freeze waiting tasks.
- CVE-2026-99248Unknown
In the Linux kernel, the i2c: xiic driver was changed to restore non-managed runtime PM instead of the devres-based approach to fix a clk WARN flood. The managed release tore down runtime PM in the wrong order, causing the clock to be disabled twice and triggering "clkN already disabled" warnings on every teardown.
- CVE-2026-99247Unknown
In the Linux kernel, if trace buffer allocation fails during early boot, tracing_disabled remains set and the global trace array events list stays uninitialized. tracer_init_tracefs_work_func() runs asynchronously without checking this state and calls event_trace_init() and init_tracer_tracefs(), leading to a NULL pointer dereference Oops during boot. The fix checks tracing_disabled at the start of the work function.
- CVE-2026-99215Unknown
In the Linux kernel power supply subsystem, a use-after-free vulnerability exists. If a power supply is unregistered while its external_power_changed() callback is still running, the driver may free data that the callback is still accessing, leading to a kernel crash (NULL pointer dereference).
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Fix a deadlock issue related to automatic dump If we issue a disabling PHY command, the device attached with it will go offline, if a 2 bit ECC error occurs at the same time, a hung task may be found: [ 4613.652388] INFO: task kworker/u256:0:165233 blocked for more than 120 seconds. [ 4613.666297] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.674809] task:kworker/u256:0 state:D stack: 0 pid:165233 ppid: 2 flags:0x00000208 [ 4613.683959] Workqueue: 0000:74:02.0_disco_q sas_revalidate_domain [libsas] [ 4613.691518] Call trace: [ 4613.694678] __switch_to+0xf8/0x17c [ 4613.698872] __schedule+0x660/0xee0 [ 4613.703063] schedule+0xac/0x240 [ 4613.706994] schedule_timeout+0x500/0x610 [ 4613.711705] __down+0x128/0x36c [ 4613.715548] down+0x240/0x2d0 [ 4613.719221] hisi_sas_internal_abort_timeout+0x1bc/0x260 [hisi_sas_main] [ 4613.726618] sas_execute_internal_abort+0x144/0x310 [libsas] [ 4613.732976] sas_execute_internal_abort_dev+0x44/0x60 [libsas] [ 4613.739504] hisi_sas_internal_task_abort_dev.isra.0+0xbc/0x1b0 [hisi_sas_main] [ 4613.747499] hisi_sas_dev_gone+0x174/0x250 [hisi_sas_main] [ 4613.753682] sas_notify_lldd_dev_gone+0xec/0x2e0 [libsas] [ 4613.759781] sas_unregister_common_dev+0x4c/0x7a0 [libsas] [ 4613.765962] sas_destruct_devices+0xb8/0x120 [libsas] [ 4613.771709] sas_do_revalidate_domain.constprop.0+0x1b8/0x31c [libsas] [ 4613.778930] sas_revalidate_domain+0x60/0xa4 [libsas] [ 4613.784716] process_one_work+0x248/0x950 [ 4613.789424] worker_thread+0x318/0x934 [ 4613.793878] kthread+0x190/0x200 [ 4613.797810] ret_from_fork+0x10/0x18 [ 4613.802121] INFO: task kworker/u256:4:316722 blocked for more than 120 seconds. [ 4613.816026] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.824538] task:kworker/u256:4 state:D stack: 0 pid:316722 ppid: 2 flags:0x00000208 [ 4613.833670] Workqueue: 0000:74:02.0 hisi_sas_rst_work_handler [hisi_sas_main] [ 4613.841491] Call trace: [ 4613.844647] __switch_to+0xf8/0x17c [ 4613.848852] __schedule+0x660/0xee0 [ 4613.853052] schedule+0xac/0x240 [ 4613.856984] schedule_timeout+0x500/0x610 [ 4613.861695] __down+0x128/0x36c [ 4613.865542] down+0x240/0x2d0 [ 4613.869216] hisi_sas_controller_prereset+0x58/0x1fc [hisi_sas_main] [ 4613.876324] hisi_sas_rst_work_handler+0x40/0x8c [hisi_sas_main] [ 4613.883019] process_one_work+0x248/0x950 [ 4613.887732] worker_thread+0x318/0x934 [ 4613.892204] kthread+0x190/0x200 [ 4613.896118] ret_from_fork+0x10/0x18 [ 4613.900423] INFO: task kworker/u256:1:348985 blocked for more than 121 seconds. [ 4613.914341] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.922852] task:kworker/u256:1 state:D stack: 0 pid:348985 ppid: 2 flags:0x00000208 [ 4613.931984] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas] [ 4613.939549] Call trace: [ 4613.942702] __switch_to+0xf8/0x17c [ 4613.946892] __schedule+0x660/0xee0 [ 4613.951083] schedule+0xac/0x240 [ 4613.955015] schedule_timeout+0x500/0x610 [ 4613.959725] wait_for_common+0x200/0x610 [ 4613.964349] wait_for_completion+0x3c/0x5c [ 4613.969146] flush_workqueue+0x198/0x790 [ 4613.973776] sas_porte_broadcast_rcvd+0x1e8/0x320 [libsas] [ 4613.979960] sas_port_event_worker+0x54/0xa0 [libsas] [ 4613.985708] process_one_work+0x248/0x950 [ 4613.990420] worker_thread+0x318/0x934 [ 4613.994868] kthread+0x190/0x200 [ 4613.998800] ret_from_fork+0x10/0x18 This is because when the device goes offline, we obtain the hisi_hba semaphore and send the ABORT_DEV command to the device. However, the internal abort timed out due to the 2 bit ECC error and triggers automatic dump. In addition, since the hisi_hba semaphore has been obtained, the dump cannot be executed and the controller cannot be reset. Therefore, the deadlocks occur on the following circular dependencies ---truncated---
Vulnerability data from NVD (NIST) · CISA KEV · EPSS