CVE-2023-53523
MediumCVSS 5.5Exploitation Probability (EPSS)
Low risk3th percentile - higher than 3% of all known CVEs
Summary
In the Linux kernel, the gs_usb driver has a time stamp counter initialization flaw that can lead to a NULL pointer dereference. The issue occurs when the driver is unloaded or unbound before the interface is shut down, and received CAN frames are processed before the timecounter infrastructure is set up. The fix moves initialization before URB submission and converts it from per-channel to per-device.
Risk Assessment
This can cause a kernel crash (NULL pointer dereference), leading to denial of service or system instability on hosts using gs_usb CAN devices.
Recommendation
Update the Linux kernel to a version containing the fix or apply the relevant patch for the gs_usb driver.
Other vulnerabilities in Linux kernel
See all- CVE-2026-99259Unknown
In the Linux kernel, the soc/tegra: pmc driver has an uninitialised early_pmc->rate variable for legacy 32-bit Tegra devices. The variable is never configured and remains 0, triggering a warning in tegra_pmc_enter_suspend_mode(). The issue appeared after the PMC driver was changed to create the PMC context dynamically, updating rate only in the new context.
- CVE-2026-99258Unknown
In the Linux kernel, hv_apicid_to_vp_index() uses per-CPU hypercall input and output pages. In an SEV-SNP CoCo VM without a paravisor the output page is not allocated, so the hypervisor stores the resulting VP index into memory not allocated by the guest. The fix uses the input page for both input and output.
- CVE-2026-99257Unknown
In the Linux kernel, the shared GPIO mechanism based on platform lookup tables requires an associated struct device. An fwnode-based lookup with no associated device currently causes a NULL-pointer dereference. The fix adds a check that lets the kernel gracefully handle this situation with an error.
- CVE-2026-99256Unknown
In the Linux kernel, the dm cache module used a rw_semaphore for background_work_lock, although write locks on rw_semaphores have strict owner semantics. The locking process was not always the same as the unlocking one, triggering a warning with CONFIG_DEBUG_RWSEMS during suspend/resume of a cache device. The fix replaces the rw_semaphore with a spinlock and a wait queue.
- CVE-2026-99251Unknown
In the Linux kernel, init_vp_index() contains a retry loop that strips CPUs from a node if they are already in the allocated cpumask or outside the HK_TYPE_MANAGED_IRQ housekeeping cpumask. If the housekeeping cpumask contains no CPU in that node, the loop becomes infinite. The fix skips NUMA nodes with no housekeeping CPU and aborts early when no online housekeeping CPUs exist.
- CVE-2026-99250Unknown
In the Linux kernel, the NBCON console printing kthreads are started very early during boot via early_initcall(). Asynchronously enabling/disabling interrupts during early boot may interfere with early SMP setup on some hardware platforms, causing hangs. The fix postpones kthread startup until after all arch initcalls have completed.
- CVE-2026-99249Unknown
In the Linux kernel, zap_pid_ns_processes() waiting for PID namespace cleanup was not freezable. A tracer outside the namespace that does not reap its traced zombies keeps PIDs allocated, making the wait unbounded and causing every suspend attempt to fail. The fix makes the wait loops use TASK_FREEZABLE states so the freezer can freeze waiting tasks.
- CVE-2026-99248Unknown
In the Linux kernel, the i2c: xiic driver was changed to restore non-managed runtime PM instead of the devres-based approach to fix a clk WARN flood. The managed release tore down runtime PM in the wrong order, causing the clock to be disabled twice and triggering "clkN already disabled" warnings on every teardown.
- CVE-2026-99247Unknown
In the Linux kernel, if trace buffer allocation fails during early boot, tracing_disabled remains set and the global trace array events list stays uninitialized. tracer_init_tracefs_work_func() runs asynchronously without checking this state and calls event_trace_init() and init_tracer_tracefs(), leading to a NULL pointer dereference Oops during boot. The fix checks tracing_disabled at the start of the work function.
- CVE-2026-99215Unknown
In the Linux kernel power supply subsystem, a use-after-free vulnerability exists. If a power supply is unregistered while its external_power_changed() callback is still running, the driver may free data that the callback is still accessing, leading to a kernel crash (NULL pointer dereference).
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS

