CVE-2026-80589
CriticalCVSS 9.8Exploitation Probability (EPSS)
Low risk29th percentile - higher than 29% of all known CVEs
Summary
A vulnerability in the Linux kernel block subsystem was found where the timeout timer is not stopped when releasing a disk that was never added (e.g., after a failed probe). This leads to a use-after-free in the timer mechanism, potentially causing system crashes or privilege escalation.
Risk Assessment
The risk includes system crashes (kernel panic) or potential privilege escalation in environments with NVMe disks, especially during concurrent controller resets or device addition failures. An attacker with local access could exploit this to destabilize the system.
Recommendation
Immediately apply the official Linux kernel patch that stops the timer and queue work items before calling blk_mq_exit_queue(). Also update the system to a kernel version containing the fix.
Other vulnerabilities in Linux kernel
See all- CVE-2026-99270Unknown
A use-after-free (UAF) vulnerability exists in the Linux kernel's reqsk_timer_handler() function. When TCP socket migration fails at inet_ehash_insert(), the code jumps to the no_ownership label and immediately frees the new reqsk via __reqsk_free() without stopping its timer, potentially leading to a UAF.
- CVE-2026-99269Unknown
In the Linux kernel sched_ext scheduler, a task can be found on a non-local DSQ while the CPU that dispatched it is still running ops.dequeue() and hasn't cleared SCX_OPSS_DISPATCHING. The DSQ consume and move paths don't wait for dispatch to finish and can operate on the task concurrently with the dispatcher. The fix adds scx_wait_dispatching() before operating on the task.
- CVE-2026-99268Unknown
In io_uring with IORING_SETUP_DEFER_TASKRUN, completions are queued as local work and only become CQEs when the submitter enters the kernel to wait for events. io_uring_poll() reports EPOLLIN if local work is pending, but only if the work exists at call time; after DEFER_TASKRUN was added, the ->poll_wq wakeup was replaced by directly waking the submitter, so poll() can sleep despite pending work. The fix wakes ->poll_wq when the first entry is put on the work list, using an RCU callback when needed.
- CVE-2026-99267Unknown
In io_uring NAPI with dynamic tracking, a NAPI id not seen for a minute should be dropped from the ring's busy-poll list. However, the timeout is computed incorrectly — SEC_CONVERSION is used instead of the number of jiffies per second, giving about eight years for HZ=1000 and overflowing on 32-bit systems. As a result, entries are never removed and every wait polls all historical ids.
- CVE-2026-99266Unknown
In io_uring zcrx, io_zcrx_queue_cqe() computes the buffer offset in its area from net_iov_idx(), which is an unsigned int, so the shift is done in 32 bits and only the result is widened to the u64 placed in the CQE. An area can be up to 1 TB, so for every niov beyond the first 4 GB the CQE points the application at a buffer 4 GB (or a multiple) below the correct one. The application reads wrong data and returns a buffer it doesn't own via the refill queue while the real one is never given back.
- CVE-2026-99265Unknown
In io_uring/openclose, io_pipe_fixed() installs both ends of the pipe in the fixed file table, drops ->uring_lock, and copies the slot numbers to the application. If that faults, it takes the lock again and removes whatever is in these slots. If the request is run by io-wq, the lock really is dropped and the slots are visible to others; by the time the error path gets to them, they may have been closed and reused (by IORING_OP_CLOSE, direct open/accept, or IORING_REGISTER_FILES_UPDATE), causing removal of a file unrelated to the failed request. The fix performs the copy with the lock held.
- CVE-2026-99264Unknown
A bug was fixed in the Linux kernel's io_uring/net handling of recv retries on uncommitted buffers. When a receive was retried after a partial transfer, the kernel could hand out buffer memory that the retried request was still writing to, causing data overwrites. The request is now completed with the bytes received instead of retried, and MSG_WAITALL is no longer honoured for incremental buffers or multi-buffer bundles.
- CVE-2026-99263Unknown
In io_uring/poll, if a wakeup sets IO_POLL_RETRY_FLAG between the owning task consuming the existing instance of IO_POLL_RETRY_FLAG and the loop check in io_poll_check_events(), request processing stalls until an unrelated wakeup arrives. The fix uses atomic_cmpxchg instead of atomic_sub_return to guarantee both the count v and poll_refs are 0 and no wakeups are missed.
- CVE-2026-99262Unknown
In io_uring/timeout, an IORING_OP_TIMEOUT run by io-wq due to IOSQE_ASYNC has the same problem as poll, futex, and waitid. io_wq_submit_work() checks IO_WQ_WORK_CANCEL only once before issuing the request; a cancel in between flags the work, gets -EALREADY, and searches ->timeout_list in vain while the worker adds the request and starts the timer. Nobody checks the flag again and the timeout runs its course, and at ring exit a task can get stuck for the full duration. The fix checks the flag under ->timeout_lock and fails the request if set.
- CVE-2026-99261Unknown
In the drm/amdgpu driver, reservation fence slot allocation for eviction of userq per-vm BOs has been corrected. The fix addresses both the move overflow and the eviction fence add for these buffers.
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: block: stop the timeout timer when releasing a never added disk disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS

