CVE-2026-74384
CriticalCVSS 9.8Exploitation Probability (EPSS)
Elevated risk54th percentile - higher than 54% of all known CVEs
Summary
A vulnerability was found in the Linux kernel's nvme-multipath driver. The nvme_ns_head structure has a flexible array current_path[] indexed by NUMA node ID. Memory allocation used num_possible_nodes, which on systems with sparse NUMA IDs (e.g., POWER9) leads to out-of-bounds access (slab-out-of-bounds).
Risk Assessment
The vulnerability can cause system crash or memory corruption, potentially disrupting services in production. It cannot be exploited remotely but may be triggered during normal NVMe disk operations.
Recommendation
Update the Linux kernel to a version containing the fix (using nr_node_ids instead of num_possible_nodes). If not possible, restrict use of systems with sparse NUMA IDs (e.g., POWER9) until the patch is applied.
Other vulnerabilities in Linux kernel
See all- CVE-2026-99270Unknown
A use-after-free (UAF) vulnerability exists in the Linux kernel's reqsk_timer_handler() function. When TCP socket migration fails at inet_ehash_insert(), the code jumps to the no_ownership label and immediately frees the new reqsk via __reqsk_free() without stopping its timer, potentially leading to a UAF.
- CVE-2026-99269Unknown
In the Linux kernel sched_ext scheduler, a task can be found on a non-local DSQ while the CPU that dispatched it is still running ops.dequeue() and hasn't cleared SCX_OPSS_DISPATCHING. The DSQ consume and move paths don't wait for dispatch to finish and can operate on the task concurrently with the dispatcher. The fix adds scx_wait_dispatching() before operating on the task.
- CVE-2026-99268Unknown
In io_uring with IORING_SETUP_DEFER_TASKRUN, completions are queued as local work and only become CQEs when the submitter enters the kernel to wait for events. io_uring_poll() reports EPOLLIN if local work is pending, but only if the work exists at call time; after DEFER_TASKRUN was added, the ->poll_wq wakeup was replaced by directly waking the submitter, so poll() can sleep despite pending work. The fix wakes ->poll_wq when the first entry is put on the work list, using an RCU callback when needed.
- CVE-2026-99267Unknown
In io_uring NAPI with dynamic tracking, a NAPI id not seen for a minute should be dropped from the ring's busy-poll list. However, the timeout is computed incorrectly — SEC_CONVERSION is used instead of the number of jiffies per second, giving about eight years for HZ=1000 and overflowing on 32-bit systems. As a result, entries are never removed and every wait polls all historical ids.
- CVE-2026-99266Unknown
In io_uring zcrx, io_zcrx_queue_cqe() computes the buffer offset in its area from net_iov_idx(), which is an unsigned int, so the shift is done in 32 bits and only the result is widened to the u64 placed in the CQE. An area can be up to 1 TB, so for every niov beyond the first 4 GB the CQE points the application at a buffer 4 GB (or a multiple) below the correct one. The application reads wrong data and returns a buffer it doesn't own via the refill queue while the real one is never given back.
- CVE-2026-99265Unknown
In io_uring/openclose, io_pipe_fixed() installs both ends of the pipe in the fixed file table, drops ->uring_lock, and copies the slot numbers to the application. If that faults, it takes the lock again and removes whatever is in these slots. If the request is run by io-wq, the lock really is dropped and the slots are visible to others; by the time the error path gets to them, they may have been closed and reused (by IORING_OP_CLOSE, direct open/accept, or IORING_REGISTER_FILES_UPDATE), causing removal of a file unrelated to the failed request. The fix performs the copy with the lock held.
- CVE-2026-99264Unknown
A bug was fixed in the Linux kernel's io_uring/net handling of recv retries on uncommitted buffers. When a receive was retried after a partial transfer, the kernel could hand out buffer memory that the retried request was still writing to, causing data overwrites. The request is now completed with the bytes received instead of retried, and MSG_WAITALL is no longer honoured for incremental buffers or multi-buffer bundles.
- CVE-2026-99263Unknown
In io_uring/poll, if a wakeup sets IO_POLL_RETRY_FLAG between the owning task consuming the existing instance of IO_POLL_RETRY_FLAG and the loop check in io_poll_check_events(), request processing stalls until an unrelated wakeup arrives. The fix uses atomic_cmpxchg instead of atomic_sub_return to guarantee both the count v and poll_refs are 0 and no wakeups are missed.
- CVE-2026-99262Unknown
In io_uring/timeout, an IORING_OP_TIMEOUT run by io-wq due to IOSQE_ASYNC has the same problem as poll, futex, and waitid. io_wq_submit_work() checks IO_WQ_WORK_CANCEL only once before issuing the request; a cancel in between flags the work, gets -EALREADY, and searches ->timeout_list in vain while the worker adds the request and starts the timer. Nobody checks the flag again and the timeout runs its course, and at ring exit a task can get stuck for the full duration. The fix checks the flag under ->timeout_lock and fails the request if set.
- CVE-2026-99261Unknown
In the drm/amdgpu driver, reservation fence slot allocation for eviction of userq per-vm BOs has been corrected. The fix addresses both the move overflow and the eviction fence add for these buffers.
Original NVD description (English source)
In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix flex array size in struct nvme_ns_head struct nvme_ns_head contains a flexible array member, current_path[], which is indexed using the NUMA node ID: head->current_path[numa_node_id()] The structure is currently allocated as: size = sizeof(struct nvme_ns_head) + (num_possible_nodes() * sizeof(struct nvme_ns *)); head = kzalloc(size, GFP_KERNEL); This allocation assumes that NUMA node IDs are sequential and densely packed from 0 .. num_possible_nodes() - 1. While this assumption holds on many systems, it is not always true on some architectures such as powerpc. On some powerpc systems, NUMA node IDs can be sparse. For example: NUMA: NUMA node(s): 6 NUMA node0 CPU(s): 80-159 NUMA node8 CPU(s): 0-79 NUMA node252 CPU(s): NUMA node253 CPU(s): NUMA node254 CPU(s): NUMA node255 CPU(s): That is, the possible/online NUMA node IDs are: 0, 8, 252, 253, 254, 255 In this case: num_possible_nodes() = 6 So memory is allocated for only 6 entries in current_path[]. However, the array is later indexed using the actual NUMA node ID. As a result, accesses such as: head->current_path[8] or head->current_path[252] goes out of bounds, leading to the following KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core] Write of size 8 at addr c00020003bda35b8 by task kworker/u641:2/1997 CPU: 1 UID: 0 PID: 1997 Comm: kworker/u641:2 Not tainted 7.1.0-rc5-dirty #14 PREEMPT(lazy) Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Workqueue: async async_run_entry_fn Call Trace: [c000200037fa7510] [c0000000021c23d4] dump_stack_lvl+0x88/0xdc (unreliable) [c000200037fa7540] [c0000000009fda90] print_report+0x22c/0x67c [c000200037fa7630] [c0000000009fd508] kasan_report+0x108/0x220 [c000200037fa7740] [c0000000009fff48] __asan_store8+0xe8/0x120 [c000200037fa7760] [c008000018e76474] nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core] [c000200037fa7800] [c008000018e6556c] nvme_update_ns_info+0x4a4/0x5e0 [nvme_core] [c000200037fa7a50] [c008000018e66270] nvme_alloc_ns+0x6d8/0x1a70 [nvme_core] [c000200037fa7c20] [c008000018e679fc] nvme_scan_ns+0x3f4/0x630 [nvme_core] [c000200037fa7d10] [c00000000031f22c] async_run_entry_fn+0x9c/0x3a0 [c000200037fa7db0] [c0000000002fa544] process_one_work+0x414/0xa10 [c000200037fa7ec0] [c0000000002fbf00] worker_thread+0x320/0x640 [c000200037fa7f80] [c00000000030d0f8] kthread+0x278/0x290 [c000200037fa7fe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 Allocated by task 1997 on cpu 1 at 35.928317s: The buggy address belongs to the object at c00020003bda3000 which belongs to the cache kmalloc-rnd-15-2k of size 2048 The buggy address is located 16 bytes to the right of allocated 1448-byte region [c00020003bda3000, c00020003bda35a8) The buggy address belongs to the physical page: Memory state around the buggy address: c00020003bda3480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c00020003bda3500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >c00020003bda3580: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ^ c00020003bda3600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00020003bda3680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fix this by allocating the flexible array using nr_node_ids instead of num_possible_nodes(). Since nr_node_ids represents the maximum possible NUMA node IDs, indexing current_path[] using numa_node_id() becomes safe even on systems with sparse node IDs.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS

