CVE-2026-10647
MediumCVSS 5.3Exploitation Probability (EPSS)
Low risk10th percentile - higher than 10% of all known CVEs
Summary
The USB CDC-NCM driver in Zephyr RTOS ignores the return value of usbd_ep_enqueue(). When enqueue fails (e.g., during USB bus suspend), the function blocks on a semaphore that never signals, causing a permanent deadlock of the TX thread and halting network transmission until reboot.
Risk Assessment
The risk is persistent loss of network connectivity over the NCM interface and potential stalling of other network interfaces sharing the same TX thread. A malicious USB host can intentionally suspend the bus to trigger the deadlock and disrupt device operation.
Recommendation
Immediately update Zephyr RTOS to a version containing the fix (post v4.4.0) that checks the return value of usbd_ep_enqueue() and frees the buffer before the blocking wait.
Other vulnerabilities in Zephyr RTOS
See all- CVE-2026-82962Medium
A vulnerability in ethernet_fill_header() in the Zephyr RTOS network stack prepends the Ethernet header in place via net_buf_push without verifying that the packet has sufficient headroom. Packets allocated by a different L2 (e.g., 802.15.4/OpenThread, PPP) and handed to Ethernet through routing or tunnelling have too little (usually zero) headroom, causing an out-of-bounds write. In builds without CONFIG_ASSERT and CONFIG_NET_BUF_HARDENING this results in memory corruption.
- CVE-2026-19595Medium
A vulnerability in the Zephyr RTOS syscall verifier: z_vrfy_rtio_cqe_get_mempool_buffer() validated its output parameters buff and buff_len with K_SYSCALL_MEMORY_READ() instead of K_SYSCALL_MEMORY_WRITE(). This allows an unprivileged user-mode thread to invoke the syscall with pointers to read-only memory, causing a supervisor-mode store outside the permitted region or a kernel fault that halts or reboots the device.
- CVE-2026-19940Medium
A vulnerability in the Bluetooth Classic Hands-Free Profile Audio Gateway (HFP AG) implementation in Zephyr RTOS causes corruption of the kernel timeout list. By sending AT+CIND? and quickly reconnecting, a remote attacker can trigger a system-wide fault or hang.
- CVE-2026-19736High
The NXP MCUX TRNG entropy driver in Zephyr (drivers/entropy/entropy_mcux_trng.c) passes the caller's byte count directly to the SDK routine TRNG_GetRandomData(), which on i.MX RT5xx/RT6xx parts always copies whole 32-bit words and rounds entropy draws up to a multiple of 128 bytes. A request length not a multiple of four causes an underflow in the SDK's buffer-full check, leading to an overflow of up to 127 bytes past the caller's buffer.
- CVE-2026-19575High
A vulnerability in Zephyr RTOS affects the user-mode verification handler z_vrfy_device_deinit() in kernel/device.c, which validated its dev argument with K_SYSCALL_OBJ_INIT(dev, K_OBJ_ANY). Because k_object_validate() short-circuits type comparison for K_OBJ_ANY, the check only verified that the pointer was the base address of some kernel object the calling thread was granted, without comparing the object's actual type. This allows a local user-mode thread to pass a thread stack object (e.g., from k_thread_stack_alloc()) and achieve supervisor-mode kernel code execution.
- CVE-2026-19574High
In the ARM64 MMU back-end of Zephyr RTOS, address space identifiers (ASIDs) are assigned by a bare round-robin counter, which after wrapping past 255 possible values can hand the same ASID to a new domain while a still-live domain holds it. Because domain-private mappings are installed as non-global (MT_NG), the ASID is the only tag separating cached translations in the TLB, and the context-switch path does not flush the TLB for a duplicate reached through a third domain. As a result, user-mode threads in one domain can read and write memory belonging to another domain, defeating memory-domain isolation.
- CVE-2026-19569High
A vulnerability in the Zephyr RTOS kernel allows an unprivileged user-mode thread to perform an out-of-bounds write in kernel memory. It stems from missing overflow checks when calculating allocation sizes for dynamic kernel objects, leading to undersized heap allocations. An attacker can exploit this to escalate privileges and execute arbitrary code at the kernel level.
- CVE-2026-19185High
A vulnerability was found in the system-call verifier for i3c_do_ccc() in Zephyr RTOS, which fails to validate per-target data pointers in the i3c_ccc_payload structure. The verifier also operates on the caller's live structure, allowing another thread to modify fields between check and use. This allows an unprivileged thread to write to arbitrary kernel addresses (via read CCC) or disclose kernel memory (via write CCC), leading to privilege escalation.
- CVE-2026-18747Medium
A vulnerability in the SMP-over-console transport in Zephyr RTOS allows an unauthenticated attacker to trigger a buffer length underflow by sending a single 7-byte frame to the management console. This leads to an out-of-bounds read, potentially causing a denial of service on the MCUmgr thread or memory disclosure.
- CVE-2026-18417Medium
In Zephyr RTOS, a vulnerability exists in the BSD socket layer where an asynchronous error was stored in the user_data field of the network context, which for listening TCP sockets is used to store a pointer to the parent context. In v4.3.0, after an interface-down event, the accept callback was not disarmed, leading to reuse of the poisoned value as a pointer and writes to an invalid address, causing a kernel fatal error (device crash or reset).
Original NVD description (English source)
The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data->sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadlocks permanently while holding the interface TX lock, halting transmission until reboot (and leaking the transmit buffer). The enqueue fails under conditions controlled by the attached USB host: usbd_ep_enqueue() returns -EPERM whenever the bus is suspended (a standard, persistent host operation), and the underlying udc_ep_enqueue() returns -EPERM/-ENODEV on disconnect, bus reset, or endpoint disable. The cdc_ncm_send() guard only checks the DATA_IFACE_ENABLED and IFACE_UP flags, not the suspended state, so a packet transmitted while the host holds the bus suspended reaches the failing enqueue and deadlocks the TX path. The realistic trigger is a bus suspend that occurs while the exported network interface is active and has traffic to send — host sleep, USB selective/auto-suspend, or hub power management — after which any device-originated packet deadlocks the path, recoverable only by reboot. The impact is a persistent loss of the virtual network connection between the host's NCM interface and the Zephyr device; because the deadlocked thread is a shared traffic-class TX thread, egress on other network interfaces can stall as well. There is no memory corruption or information disclosure. The defect was introduced with the CDC-NCM driver and shipped in releases through v4.4.0; it is fixed by checking the usbd_ep_enqueue() return value and freeing the buffer before the blocking wait.
Vulnerability data from NVD (NIST) · CISA KEV · EPSS